- Overview
-
AIR-AP1832I-R-K9C is one of the Cisco Aironet 1830 Series Access Points. Cisco 1830 AP series is ideal f small and medium-sized netwks. This series suppts the latest Wi-Fi standard, the 802.11ac Wave 2 standard. The 1830 Series extends suppt to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-perfmance laptops that have integrated 802.11ac Wave 1 Wave 2 suppt. The model AIR-AP1832I-R-K9C provides R Regulaty Domain and internal antennas. Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.
Quick Specs
Table 1 shows the quick specs of AIR-AP1832I-R-K9C.
Part Number
AIR-AP1832I-R-K9C
Description
802.11ac Wave 2 AP, 3x3:2, Internal Antenna, R Regulaty Domain
★ Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.
Features
- 3x3 MIMO with two spatial streams, single-user multiuser MIMO
- MRC
- 802.11ac beamfming (transmit beamfming)
- 20-, 40-, and 80-MHz channels
- PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD suppt
Regulaty Domain
R (R regulaty domain):
- 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.660 to 5,805 GHz; 7 channels
Integrated antenna
- 2.4 GHz, gain 3 dBi, internal omni, hizontal beamwidth 360°
- 5 GHz, gain 5 dBi, internal omni, hizontal beamwidth 360°
Interfaces
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
- Management console pt (RJ-45)
- USB 2.0 (enabled via future software)
Dimensions (W x L x H)
8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight
3.12 lb (1.41 kg)
Product Details
Figure 1 shows the AIR-AP1832I LED Indicat Position.
Note: ① LED indicat position
Table 2 shows the AP LED indicats’ descriptions.
Message Type
LED State
Message Meaning
Association status
Chirping Green
Nmal operating condition, but no wireless client associated
Green
Nmal operating condition, at least one wireless client association
Boot loader status
Green
Executing boot loader
Boot loader err
Red
Boot loader signing verification failure
Access point regulaty domain priming status
Blinking Amber
AP priming to a new regulaty domain by Neighb Discovery Protocol (NDP), in progress
Cycling Red, Green and off
AP waiting to be primed
Chirping Red
AP primed to a wrong regulaty domain
Operating status
Blinking amber
Software upgrade in progress
Cycling through green, red, and amber
Discovery/join process in progress
Rapidly cycling through red, green, amber, and off.
Access point location command invoked from controller web interface.
Access point operating system errs
Cycling through red, green, amber, and off
General warning; insufficient inline power
Figure 2 shows AIR-AP1832I Pts and Connections.
Note:
①
Mode button
④
PoE-In pt (Ethernet Uplink pt)
②
RJ-45 console pt
⑤
48 V DC input power pt
③
USB 2.0 pt
Compare to Similar Items
Table 3 shows the comparison between two AP.
Part Number
AIR-AP1832I-R-K9
AIR-AP1832I-R-K9C
Description
802.11ac Wave 2 AP, 3x3:2
802.11ac Wave 2 AP, 3x3:2
★ Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.
Integrated antenna
Yes
Yes
Regulaty Domain
R (R regulaty domain):
- 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.660 to 5,805 GHz; 7 channels
R (R regulaty domain):
- 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.660 to 5,805 GHz; 7 channels
Get Me Infmation
Do you have any question about the AIR-AP1832I-R-K9C?
Contact us now via daqintech@aliyun.com .
- Specification
AIR-AP1832I-R-K9C Specification
Description
802.11ac Wave 2 AP, 3x3:2, Internal Antenna, R Regulatory Domain
★ Model number ending in C is, by default, factory-shipped with a Cisco Mobility Express software image.
Software
Cisco Unified Wireless Network Software Release with AireOS wireless controllers:
- 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points
Deployment modes
Centralized, standalone, sniffer, Cisco FlexConnect™, monitor, OfficeExtend, mesh
Supported wireless LAN controllers
- Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller
- Cisco Mobility Express
802.11n version 2.0 (and related) capabilities
- 3x3 MIMO with two spatial streams
- Maximal ratio combining (MRC)
- 20- and 40-MHz channels
- PHY data rates up to 300 Mbps (40 MHz with 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 dynamic frequency selection (DFS)
- Cyclic shift diversity (CSD) support
802.11ac Wave 1 and 2 capabilities
- 3x3 MIMO with two spatial streams, single-user or multiuser MIMO
- MRC
- 802.11ac beamforming (transmit beamforming)
- 20-, 40-, and 80-MHz channels
- PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
Regulatory Domain
R (R regulatory domain):
- 2.412 to 2.472 GHz; 13 channels
- 5.180 to 5.320 GHz; 8 channels
- 5.660 to 5,805 GHz; 7 channels
Integrated antenna
- 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360°
- 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces
- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
- Management console port (RJ-45)
- USB 2.0 (enabled via future software)
Indicators
- Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions
(W x L x H)
- Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight
- 3.12 lb (1.41 kg)
Environmental
Cisco Aironet 1830i
- Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
- Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
- Operating temperature: 32° to 104°F (0° to 40°C)
- Operating humidity: 10% to 90% (noncondensing)
- Operating altitude test: 40˚C, 9843 ft.
System memory
- 1 GB DRAM
- 256 MB flash
Input power requirements
- AP1830: 44 to 57 VDC
- Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw
- 15.4W
Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
Powering options
- 802.3af/802.3at
- Enhanced PoE
- Cisco local power supply, AIR-PWR-C=
- Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6=
Note: If 802.3af PoE is the source of power, the USB port is disabled.
Warranty
Limited lifetime hardware warranty
- Shipping & Payment
Delivery
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL
2-4 business days Fedex
2-4 business days Hong Kong EMS
5-10 business days Hong Kong Air Parcel
10-20 business days By Sea
10-20 business days Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.Deliver to door:
daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.Payment Methods
Paypal Master Card Visa Discover American
ExpressJCB Wire Transfer eCheck WestUnion - Warranty
Warranty
100% Low Price Guarantee:
daqintech.com provides high-quality products at low wholesale prices
All items are ORIGINAL and GENUINE only:
Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year.
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Standard Services
Branch Offices : Hong Kong | USA | UKHong Kong WarehouseShenzhen WarehouseQuality CheckingPackagingShippingRecently Viewed Products
-
AIR-AP1832I-Z-K9
US$ -
AIR-AP1832I-S-K9
US$ -
AIR-AP1832I-T-K9
US$ -
AIRAP1832I-AK910C
US$ -
AIRAP1832I-BK910C
US$ -
AIR-AP1832I-S-K9C
US$